Basic Mikrotik Hotspot

Setting up a basic MikroTik hotspot

Mikrotik RouterOS includes an excellent hotspot solution. Read on for details on getting a basic hotspot going using RouterOS on any standard x86 PC hardware or a RouterBOARD.

The RouterOS hotspot solution is very powerful and only the very basics of the solution are covered here; just enough to get you started.
Introduction

This article assumes you want to set up a basic hotspot as shown in the diagram below. If you have a DNS server integrated into your router the same rule applies, just use the router IP for your DNS server as well.



To help get you started MikroTik now include a combined RADIUS server and simple web administration package for RouterOS called the User Manager. This provides a much simpler means of user administration then the command line or Winbox. The User Manager package is included standard with all versions of RouterOS from about 2.9.35 onwards.

Advanced users might wish to provide their own RADIUS server, however this is outside the scope of this article.
Getting the Hotspot to Work

First of all you will need to have a copy of RouterOS. You can purchase a license or download a 24-hour trial from Mikrotik. RouterBOARDs also usually come with RouterOS pre-licensed and installed. You will also need a computer with at least a 100MHz CPU, 32MB RAM and an IDE hard disk, or a RouterBOARD. Either method you choose will need a compatible wireless card and Ethernet adapter, or two Ethernet adapters with one connected to a standard wireless access point. You should check your hardware against the RouterOS compatibility list.

If you are installing RouterOS for the first time, download the ISO image from Mikrotik and burn it to CD. Note that installation of RouterOS will completely wipe the contents of the hard disk! Boot the PC off this CD and install the following packages:

System
DHCP
Wireless
Hotspot
Proxy
User Manager (optional)
Security (optional - recommended)
Advanced tools (optional)

Now to get started. Log onto the PC as admin with no password. If this box intended for deployment, change set a password by typing in password at the prompt. Change the hostname by typing in name.

Assign an IP address to each interface. As this is going to be set up as a router, they will need to be on a different subnet. Substitute wlan1 with ether2 if you have a separate access point.

[admin@Mikrotik] > ip address add address=192.168.24.3/24 interface=ether1
[admin@Mikrotik] > ip address add address=192.168.30.1/24 interface=wlan1

Now we need to add a default route to the IP of the internet router.

[admin@MikroTik] > ip route add gateway 192.168.24.1

Enable the wireless interface and set it to run as an access point as below. If you have an access point instead, ignore the command below, make sure it is running with no security enabled, use a suitable SSID and channel and change its admin password.

[admin@Mikrotik]> interface wireless set wlan1 ssid="My HotSpot" band=2.4ghz-b mode=ap-bridge

Run the hotspot setup as below. Substitute the values in italics to suit your network. The user account bears no relation to the admin account and is used for the hotspot service only. You may also need to add a host record to your DNS server for the hostname of the hotspot box. Make sure the address pool does not conflict with any devices using static IPs, such as access points.

[admin@MikroTik] > ip hotspot setup
hotspot interface: wlan1
local address of network: 192.168.30.1/24
masquerade network: yes
address pool of network: 192.168.30.2-192.168.30.99
select certificate: none
ip address of smtp server: 0.0.0.0
dns servers: 192.168.24.2
dns name: hotspot.mydomain.net (or leave this blank)
name of local hotspot user: user
password for the user: password

That’s the guts of it there. Fire up your laptop, associate to the network and try to access a web page. You should be redirected to the hotspot login page instead where you can enter the user credentials you set up earlier. Click the thumbnails for a full view of the default page.



You should now be able to access the web normally and a pop-up window will display your connection time and data usage as you go.



Bear in mind I have left out the certificate so usernames and passwords will be sent as plain text. If you intend on deploying the hotspot, you should install a certificate on it and set up SSL to protect account data from being sniffed.
Setting up User Manager

The User Manager is a nice and simple web administration for setting up user account for the MikroTik hotspot and other services. It can be hosted on either the same box as the hotspot or located in a separate box on the same local network. One User Manager package can control multiple hotspots.

Before getting the User Manager set up, check for any existing hotspot account and remove them. To do this, run the following command:

[admin@MikroTik] > ip hotspot user print
Flags: X - disabled, D - dynamic
# SERVER NAME ADDRESS PROFILE UPTIME
0 fred default 0s

If any items are listed (in this case bob), run the following command to remove them:

[admin@MikroTik] > ip hotspot user remove 0

You can delete multiple items at the same time, simply separate each item number with a comma.

To get the User Manager working we first need to add a customer login. This is used to access the UM web administration. Make sure you substitute the values in italics to suit.

[admin@MikroTik] > tool user-manager customer add login=hs_admin password=password

Now we need to add the hotspot as a RADIUS client to the user manager. This is done under the user manager router section. The shared secret can be any string of text and should be reasonably long and complex. If you are setting the user manager up on the same box as the hotspot, use 127.0.0.1 for the IP address.

[admin@MikroTik] > tool user-manager router add ip-address=hotspot-ip shared-secret=12345 subscriber=hs_admin

In return, we need to set up the hotspot to use RADIUS for user authentication. First this involves creating a RADIUS client to communicate with the UM. Remember that if you have both services on the same box, the IP address should be set to 127.0.0.1. The secret should be the same as you set up above.

[admin@MikroTik] > radius add service=hotspot address=ip-address secret=12345

Now we tell the hotspot itself to use a RADIUS client. First bring up a list of hotspot profiles:

admin@MikroTik] > ip hotspot profile print

Locate the profile in use and type the following command where 1 is the number of the profile to configure:

[admin@MikroTik] > ip hotspot profile set 1 use-radius=yes

Now we are done with configuration. Browse to http://router-ip/userman where router-ip is the IP address of the box you are configuring UM on. Login using the customer username and password created earlier.

Click on the User menu and select Add. Enter in a username, password and any other details you wish. You can limit the speed the client can access the internet by selecting the Rate limits checkbox and typing in a suitable speed (e.g. for a flat 128kBps download/64kBps upload speed limit simply type in 128k in the RX field and 64k in the TX field).

Click Add and you should be able to now access the hotspot using the username and password you specified. If you want to generate a printable ticket for the users you set up, click on the Users link, select the users to make a ticket for, click Generate and select the number of tickets per page.
Other Tips

You can also go a step further and play with some other available options, as this only skims the surface of the hotspot capabilities. I’ll post more notes as I play with additional options.

To disable communication between wireless clients (recommended), disable the default forward option on the wireless interface.
interface wireless set wlan1 default-forward=disabled
To set up a walled garden (pages people can access without authenticating), use the following command:
ip hotspot walled-garden add dst-host=www.website.com
To limit client bandwidth type the following, replacing profilename with the current hotspot profile in use and speed with the rate limit in bits per second:
ip hotspot profile set profilename rate-limit=”speed“
You can customise the login and status pages by editing the files in the hotspot directory of the Mikrotik box. You can access these via FTP.

scr:www.marlwifi.org.nz